All Services

An outdated or overloaded electrical panel is one of the most common reasons a Fort Worth home cannot safely carry its current electrical load. Neighbors Electric upgrades residential service panels across Fort Worth and the DFW metroplex, sizing every new panel to the home’s actual demand and pulling the required permit so the work is inspected and documented.

Why Fort Worth Trusts Neighbors Electric for Panel Upgrades

Homeowners in Fort Worth, Arlington, and Mansfield call us when a panel is tripping breakers, feels warm to the touch, or is simply too small for what the home now runs. We treat a panel upgrade as a safety project, not a parts swap. We explain why the existing panel is failing, what the new one will handle, and what the permit and inspection process looks like before any work begins, with no pressure and no vague pricing.

Expert Diagnostics and Service

We size every panel upgrade with a load calculation performed under NFPA 70, the National Electrical Code, rather than estimating from the old panel’s rating alone. Our electricians verify grounding and bonding, confirm correct conductor and breaker sizing, and install arc fault and ground fault protection where the code in force in this jurisdiction requires it. Diagnostic work relies on a clamp meter for measured load readings, an insulation resistance tester for suspect feeders, and a thermal camera that finds loose or overheating connections before they become a hazard.

Signs You Need an Electrical Panel Upgrade in Fort Worth

Breakers that trip repeatedly, or a panel that feels warm to the touch, are usually the first signs homeowners notice.

• Breakers that trip repeatedly, or a panel that feels warm to the touch
• A fuse box, or a panel brand with a documented history of breakers failing to trip
• A 100 amp service feeding a home that has added central air, a range, or an EV charger
• Scorch marks, a burning smell, or visible rust and corrosion inside the panel
• No room left for new circuits, or a panel that already relies on tandem breakers

Our Process

1. On-site load assessment and panel inspection, with a written scope and flat price
2. Permit application with the authority having jurisdiction in this market
3. Coordination with the utility for any required service disconnect and reconnect
4. Removal of the old panel and installation of a correctly sized new one
5. Labeling every circuit, then restoring and testing power on each one
6. Final inspection with the jurisdiction to close out the permit

How We Verify the Work

Before we consider a panel upgrade finished, we confirm correct voltage on every leg, verify the main bonding jumper and grounding electrode connection, test every arc fault and ground fault device, and torque each lug to the manufacturer’s specification with a calibrated tool. Homeowners receive a labeled circuit directory and the permit paperwork for their records.

Why Professional Panel Work Matters

A service panel is the single point where all of a home’s electrical capacity converges, which means a loose lug or a missing ground here can cause arcing that no smoke detector will catch until it is already a fire. According to the Electrical Safety Foundation International, older homes are more likely to carry electrical systems that predate today’s appliance loads, which raises the risk of an overheating or failing panel. That is why panel work is licensed, permitted work rather than a project to estimate from the outside.

Why Choose Neighbors Electric for This Service

We at Neighbors Electric are licensed Texas electricians (TECL #41555) serving Fort Worth and the surrounding DFW communities. Every panel upgrade includes a pulled permit, a flat written price before work begins, and a final inspection to close it out. We answer the phone, show up when we say we will, and leave the job site clean.

Many homeowners upgrading a panel are also adding backup power. If that describes your project, see our whole-home generator installation page, since both jobs start with the same load calculation.

Ready to Schedule?

Neighbors Electric upgrades electrical panels for homeowners across Fort Worth and the DFW metroplex, with licensed electricians, a pulled permit on every job, and flat pricing before we start. Schedule your panel upgrade, or visit our Fort Worth electricians page to see the full range of work we handle in this market. For a panel that is arcing, smoking, or has lost power entirely, our emergency electrical service covers the same area.

Frequently Asked Questions

How much does an electrical panel upgrade cost in Fort Worth?

Panel upgrade cost in Fort Worth depends on the amperage you are moving to, the condition of the existing wiring and grounding, and whether the meter base needs work as well. We provide a flat written price after an on-site load assessment, so you know the full cost before we start work.

Do I need a permit to replace my electrical panel in Fort Worth?

Yes, a panel replacement requires a permit and a final inspection in Fort Worth and the surrounding DFW jurisdictions we serve. We handle the permit application and schedule the inspection as part of every panel upgrade.

How long does a panel upgrade take?

Most residential panel upgrades are completed in a single day. Power is off for part of that day while we transfer circuits to the new panel, and we coordinate the utility disconnect and reconnect to keep the outage as short as possible.

Should I upgrade from a 100 amp to a 200 amp panel?

If your home has added central air, an EV charger, an electric range, or a room addition, a 200 amp service is often the right size. We confirm the correct amperage with a load calculation rather than a general rule, so the new panel matches what your home actually draws.

Is a Federal Pacific or Zinsco panel actually dangerous?

Federal Pacific and Zinsco panels have a documented history of breakers that fail to trip under fault conditions, meaning a circuit can stay energized during an overload or short instead of shutting off as designed. Many electricians recommend replacing these panels for that reason, and we can inspect yours and explain exactly what we find.

Will my power be off during the panel upgrade?

Yes, power is off for part of the day during the panel swap. We schedule the work with you in advance so you can plan around it, and we restore and test every circuit before we consider the job finished.